Filter
Top Products
Juniper Networks SRC Integration Integrations with Other Systems
Polycom, Inc. 191
Juniper Networks SRC Integration Procedure
To configure SRC integration
1 Go to Admin > Integrations > Juniper Networks SRC.
2 Check Enable integration with Juniper Networks® SRC and specify the
address of the SRC server.
3 Specify the login credentials for the system to connect to the SRC server.
4 Specify the subscriber URI of an endpoint known to the SRC server,
specified as in this example:
ip:ipAddress=192.168.70.228
This can be any endpoint about which the SRC server will return
information when queried to test the connection.
5 Click Update.
To verify that it can successfully communicate with the SRC server, the
Polycom DMA system queries the SRC server about the endpoint you
specified and confirms that the query is successful. A dialog box informs
you that the configuration has been updated.
6 Click OK.
See also:
“Juniper Networks SRC Integration” on page 189
“Juniper Networks SRC Page” on page 190