Filter
Top Products
History Retention Settings Call Server Configuration
Polycom, Inc. 281
2 Go to Admin > Call Server > Embedded DNS.
3 Click Enable embedded DNS service.
4 Enter the domain name of the enterprise domain for which the DMA
system is to provide DNS and click Update.
5 Reconfigure your endpoints to register to the correct domain name for
their site.
The correct domain name is:
callserver-<site name>.<logical Call Server domain name>
For instance, if the fully qualified domain name for the logical Call Server
domain is callservers.example.com, the correct domain name for
endpoints in the paris site is:
callserver-paris.callservers.example.com
See also:
“Call Server Configuration” on page 237
History Retention Settings
The following table describes the fields on the History Retention Settings
page. Only users with the Auditor role can access this page.
The settings on this page are supercluster-wide (the clusters aren’t
independently configured), but the values specified are the number of records
to be retained on each cluster, not the total for the entire supercluster.
Note
Enter all network/DNS-related information in all lower case to avoid possible
case-sensitivity issues with various devices and ensure interoperability.
Table 10-26 Fields on the History Retention Settings page
Field Description
Enable recording of
registration history
Enables the system to retain Call Server registration
records (see “Registration History Report” on
page 417).
Registration history
records to retain
The number of Call Server registration records to retain
on each cluster (up to 500,000).
Signaling message
records to retain
The number of Call Server registration signaling records
to retain on each cluster (up to 2,000,000).