Filter
Top Products
Conference Templates Conference Manager Configuration
Polycom, Inc. 209
See also:
“Conference Templates” on page 195
“Edit Conference Template Dialog Box” on page 210
“Select Layout Dialog Box” on page 219
“Conference Templates Procedures” on page 220
Layout control via
FECC/DTMF
Enables participants to change their individual layouts
using far end camera control, with or without fallback to
touchtone commands for endpoints that don’t support
FECC.
FECC without fallback is available only on Codian v4.1
MCUs.
Mute in-band DTMF Specifies whether the MCU mutes participants’ in-band
DTMF (touchtones) so that other participants don’t hear
them:
• When used for MCU control
• Always
• Never
Available only on Codian v4.1 MCUs.
Allow DTMF *6 to mute
audio
Enables conference participants to mute themselves
using the *6 touchtone command.
Available only on Codian v4.1 MCUs.
Content channel video Enables the conference to support a second video
stream for content.
This setting works only if Content Status is enabled on
the MCU.
Transmitted content
resolutions
Specifies the aspect ratio used for the content channel.
If Allow all resolutions is selected, endpoints with a
16:9 aspect ratio receive that, and others receive 4:3.
Available only on Codian v4.1 MCUs.
Conference custom
layout
Opens the Select Layout dialog box, where you can
select the number and arrangement of video frames.
Once a layout is chosen, a small representation of it
appears here. See “Select Layout Dialog Box” on
page 219.
Table 8-3 Add Conference Template dialog box (continued)
Field Description