Filter
Top Products
DMA Operations Guide Site Topology Configuration Procedures
308 Polycom, Inc.
2 For each site in your network topology, do the following:
a In the Actions list, click Add.
b In the Add Site dialog box, complete the General Info section. See
“Add Site Dialog Box” on page 287.
c To enable IP calls to/from the site, complete the ISDN Number
Assignment, H.323 Routing and/or SIP Routing sections.
d In the Subnets section, specify the subnet or subnets that make up the
site. See “Add Subnet Dialog Box” on page 297.
e Click OK.
3 Go to Network > Site Topology > Territories.
The list of territories contains an entry named Default DMA Territory. It’s
assigned to this Polycom DMA system cluster. You can edit this entry,
including changing its name and assigning sites to it.
4 Edit the Default DMA Territory entry:
a Select the entry and, in the Actions list, click Edit.
The Edit Territory dialog box appears.
b In the Territory Info section, change the name and description for this
territory if desired. Assign a primary and backup cluster for the
territory, and elect whether to host conference rooms in this territory
(the primary and backup cluster must be licensed for this capability).
c In the Associated Sites section, add all the sites to the territory. See
“Edit Territory Dialog Box” on page 304.
d Click OK.
5 Add other territories by clicking Add in the Actions list and completing
the same settings in the Add Territory dialog box.
6 Go to Network > Site Topology > Site Links, and for each direct link
between sites, do the following:
a In the Actions list, click Add.
b In the Add Site Link dialog box, define the link. See “Add Site Link
Dialog Box” on page 299.
c
Click OK.
7 Go to Network > Site Topology > Network Clouds, and for each MPLS
network cloud in your network topology, do the following:
a In the Actions list, click Add.
The Add Network Cloud dialog box appears.
b In the Cloud Info section, enter a name and description for the cloud.
c In the Linked Sites section, display the sites you defined. See “Add
Network Cloud Dialog Box” on page 306.