Filter
Top Products
IM 01E20C01-01E
8-7
8. OPERATION VIA HART COMMUNICATOR
8.3.4.2 Example of Setting Numeric-Type Data: PV Span
This example describes the setting of the flow rate span for the numeric-type parameter
“PV Span” from 100 l/min to 120 l/min.
There are two ways to open the “PV Span” setting display. Following the menu tree
configration, “PV Span” is opened as follows:
To open “PV Span” using the “Hot key”, proceed as follows:
1. Device Setup 3. Easy Setup 5. PV Span
F0808.EPS
NOTE
The “Hot key” can be used to set the easy call up parameters, “PV Span” (Flow
Span) and “Wrt Protect Menu” (Write protect function).
Hot key 1. PV Span
AXFA11 :
Online
1 Device Setup
2 PV 0.0m
3
/h
3 PV AO 4.000 mA
4 PV Span
DEL SAVE
ENTER
1
2
Press Hot key.
Select “PV Span”.
Enter “120” with alphanumeric keys.
Press ENTER (F4).
Press SEND (F2) to set the data into the AXFA11.
Return to the previous display by pressing or .
AXFA11 : FI-1100
PV Span
100 l/h
100
HELP DEL ESC
ENTER
3
Open the “PV Span” setting display.
AXFA11 : FI-1100
Hot key
1 PV Span 100 l/h
2 Wrt Protect Menu
DEL SAVE ESC ENTER
AXFA11 : FI-1100
PV Span
100 m
3
/h
120
DEL DEL ESC
ENTER
4
F4
5
(ENTER)
F2
(SEND)
‘120’
AXFA11 : FI-1100
Hot key
1 PV Span 120 l/h
2 Wrt Protect Menu
DEL SEND ESC ENTER
F0809.EPS