Pelco DX8000 DVR User Manual


 
166 C626M-C (5/06)
Testing E-Mail Notification
You test the e-mail notification configuration in the Emergency E-Mail Notification page. For information on accessing the Emergency E-Mail
Notification page, refer Accessing the Emergency E-Mail Notification Setup on page 225.
To test e-mail notification:
1. On the DX8000 toolbar, click . The Setup dialog box opens to the Camera page.
2. Click . The Notification page is displayed.
3. Click the Emergency E-mail Notification Setup tab.
4. Select the My E-mail Server Requires Authentication check box if it is not already selected.
5. Enter your personal e-mail address or the address of someone who can verify the receipt of the test e-mail in the To text box.
6. Enter DX8000 E-mail Notification Test in the Subject text box.
7. Enter the following server settings if necessary:
Server address (This address should be the same as the SMTP server address you entered above.)
•User name
Password
8. Click Test E-mail Notification.
Figure 131. E-Mail Test