Filter
Top Products
80 C626M-C (5/06)
POS SEARCH
The DX8000 allows a user to search any 24-hour period of recorded POS video and data. To record ATM/POS video and data, the ATM/POS
devices and DX8000 must first be connected and configured as follows:
• Physically connect the ATM/POS devices to the DX8000.
• Set up camera-to-ATM/POS device linking.
• Configure the DX8000 ATM/POS settings for each attached ATM/POS device.
• Start an ATM/POS transmittal and verify that the DX8000 is receiving the ATM/POS video and data.
For information about setting up the DX8000 for ATM/POS applications, refer to the following sections in the DX8000 Operations and
Programming manual:
• Linking Relay Outputs to ATM/POS Events
• Linking Cameras to Record in Response to ATM/POS Events
• Linking Presets and Patterns to ATM/POS Events
• Setting Up ATM/POS Device Communication Ports
• Setting UP ATM/POS Device Properties
This section describes how to use the POS search feature and includes the following topics:
• Understanding the POS Search View on page 97
• Searching and Displaying POS Data by Device Name on page 100
• Searching by POS Transaction Number on page 102
• Searching for All Transactions with Exceptions on page 103
• Searching for Transactions that Satisfy Specific Exceptions on page 104
• Searching for Transactions by Line Item on page 105
• Searching for Transactions by Action Code on page 106