Filter
Top Products
64 C626M-C (5/06)
ACTIVATING A PRESET TOUR
This section describes how to activate a preset tour. You can save a preset tour for later use without engaging the tour by not performing step 5
and continuing on to step 6 without clicking Apply.
To activate a preset tour:
1. On the DX8000 toolbar, click .
2. Click and then to bring up the preset tour dialog box.
3. From the drop-down box, select the preset tour (1-4) you want to activate.
4. Click Save.
5. Click Apply.
6. Click Exit to return to the main screen.
7. Click on the PTZ keypad to exit programming mode.
8. Click on the PTZ keypad to activate the tour.
Figure 48. Activating a Preset Tour
To reactivate the last preset tour you configured:
DEACTIVATING A PRESET TOUR
To deactivate a preset tour, do one of the following:
On the keypad, click Preset.
• Use the mouse to move the on-screen PTZ control.
• Activate a PTZ preset.
ᕦ
ᕣ
ᕤ
ᕥ