Filter
Top Products
269
Customising Your Camcorder Personnalisation du caméscope
After five minutes of removing the power source
The HiFi SOUND*
2)
, EDIT*
3)
and AUDIO MIX*
2)
items are returned to their default settings.
Notes on AUDIO MIX*
2)
•You can adjust the balance only for tapes recorded in the Digital8 system.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE*
6)
The mode will return to the default setting when:
– you remove the power source.
– you turn the POWER switch.
*
1)
Modes on the POWER switch vary depending on models (p. 26).
*
2)
*
3)
*
4)
*
5)
When you play back tapes recorded in the Hi8 /standard 8 mm system only.
*
6)
Changing the menu settings
Icon/item
VCR SET
PLAYER SET
NTSC PB
PB MODE*
6)
Mode
z ON PAL TV
NTSC 4.43
z AUTO
/
Meaning
To playback a tape recorded on your camcorder on a
PAL system TV.
To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode.
To automatically select the system (Hi8 /
standard 8 mm or Digital8 ) that was used to
record on the tape, and play back the tape.
To play back a tape that was recorded in the
Hi8 /standard 8 mm system when your
camcorder does not automatically distinguish the
recording system.
POWER
switch*
1)
VCR/
PLAYER
VCR