Filter
Top Products
273
Customising Your Camcorder Personnalisation du caméscope
Icon/item
TAPE SET
REC MODE
AUDIO MODE*
2)
ORC TO SET*
3)
ORC stands for “Optimising the Recording Condition.”
q REMAIN
FRAME REC*
2)
INT. REC*
2)
Mode
z SP
LP
z 12BIT
16BIT
—
z AUTO
ON
z OFF
ON
ON
z OFF
SET
Meaning
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5*
2)
/2*
3)
times the
SP mode.
To record in the 12-bit mode (two stereo sounds).
To record in the 16-bit mode (one stereo sound with
high quality).
To automatically adjust the recording condition to get
the best possible recording. Press START/STOP to
start adjustment. Your camcorder takes about 10
seconds to check the tape condition and then returns
to the standby mode.
To display the remaining tape bar:
• For about eight seconds after your camcorder is
turned on and calculates the remaining amount of
tape.
• For about eight seconds after a cassette is inserted
and your camcorder calculates the remaining
amount of tape.
• For about eight seconds after N is pressed in
VCR/PLAYER mode.
• For about eight seconds after DISPLAY is pressed
to display the screen indicators.
• For the period of tape rewinding, forwarding or
picture search in VCR/PLAYER mode.
To always display the remaining tape bar.
To deactivate the frame recording.
To activate the frame recording (p. 96).
To activate the interval recording function (p. 94).
To deactivate the interval recording function.
To set INTERVAL and REC TIME for interval
recording.
POWER
switch*
1)
VCR
CAMERA
VCR*
4)
CAMERA
CAMERA
VCR/
PLAYER
CAMERA
CAMERA
CAMERA
Changing the menu settings
*
1)
Modes on the POWER switch vary depending on models (p. 26).
*
2)
*
3)
*
4)
(continued on the following page)