Filter
Top Products
277
Customising Your Camcorder Personnalisation du caméscope
Changing the menu settings
Icon/item
OTHERS
DATA CODE*
2)
WORLD TIME
BEEP
COMMANDER*
3)
DISPLAY
REC LAMP
Mode
z DATE/CAM
DATE
—
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
z ON
OFF
Meaning
To display date, time and recording data during
playback.
To display date and time during playback.
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time difference
you set here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder.
To output the beep instead of the melody.
To cancel all sound including shutter sound.
To activate the Remote Commander supplied with
your camcorder.
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by other
VCR’s remote control.
To show the display on the LCD screen and in the
viewfinder.
To show the display on the TV screen, LCD screen
and in the viewfinder.
To light up the camera recording lamp at the front of
your camcorder.
To turn the camera recording lamp off so that the
person is not aware of the recording.
POWER
switch*
1)
VCR
MEMORY
CAMERA
MEMORY
VCR/
PLAYER
CAMERA
MEMORY
VCR/
PLAYER
CAMERA
MEMORY
VCR/
PLAYER
CAMERA
MEMORY
CAMERA
MEMORY
*
1)
Modes on the POWER switch vary depending on models (p. 26).
*
2)
*
3)
*
4)
*
5)
*
6)
(continued on the following page)