Filter
Top Products
278
Changing the menu settings
Note*
6)
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV
or VCR will not appear on the screen even when your camcorder is connected to outputs on the TV or
VCR. (Except when your camcorder is connected with the i.LINK cable)
After five minutes of removing the power source*
3)
The COMMANDER item returns to their default settings.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend that you set REC LAMP to OFF.
*
1)
Modes on the POWER switch vary depending on models (p. 26).
*
2)
*
3)
*
4)
*
5)
*
6)
Icon/item
OTHERS
VIDEO EDIT *
4)
*
5)
Mode
z RETURN
TAPE
MEMORY
—
Meaning
To cancel video editing.
To make a programme and perform video editing
(p. 136).
To make a programme and perform MPEG editing
(p. 194).
To make a programme and perform video editing
(p. 136).
POWER
switch*
1)
VCR
VCR