Filter
Top Products
Configuration
January 2009 UDA2182 Universal Dual Analyzer Product Manual 111
Sub-menu
selection
Parameter Selection or Range of
Setting
Parameter Definition
Temp Units º F
º C (default)
“Temperature Units” allows selection of either
degrees C or degrees F for the display of
measured temperature on monitor,
pharmacopoeia, control and input calibration
screens and for the entry of manual temperature
input values in Setup/Inputs. When changing the
temperature units, the manual temperature input
value is not converted. A pop-up message warns
you of this. If the value is no longer within range,
it will change to the closest range limit.
Header
1 Label (default)
2 Labels
Label/Time
Date/Time
Determines the time and date displayed within
the Monitor Display header.
Label Alphanumeric text
(max 16 characters)
default: “Honeywell
UDA”
Header Format is 1 Label
Label Alphanumeric text
(max 10 characters)
default: “Honeywell”
Header Format is Label/Time
Label 1 Alphanumeric text
(max 10 characters)
default: “Honeywell”
Header Format is Label 1 / Label 2
Label 2 Alphanumeric text
(max 10 characters)
default: “UDA2182”
Header Format is Label 1 / Label 2
Clr Evt Hist
No (default)
Yes
Clear Event History – Yes, clears the Event
History Screen (see Section 5.11)
Display
Clr Cal Hist
No (default)
Yes
Clear Cal History – Yes, clears the Calibration
History Screen (see Section 11)