Appendices
January 2009 UDA2182 Universal Dual Analyzer Product Manual 199
15 Appendices
15.1 Table of Contents
Topic See Page
PH/ORP
15.2 Appendix A – Entering Values for Lead Resistance Compensation
15.3 Appendix B – Entering Values for Lead Resistance Compensation [Titanium Cells]
15.4 Appendix C - Cyanide Waste Treatment
15.5 Appendix D – Chrome Waste Treatment
200
202
204
208
Conductivity/Resistivity
15.6 Appendix E – Two-cell Applications
15.7 Appendix F – Using a Precision Check Resistor
(For Conductivity)
212
216
Dissolved Oxygen
15.8 Appendix G – Noise Testing, Dissolved Oxygen Application
15.9 Appendix H – DO Probe and Analyzer Tests
15.10 Appendix I – Parameters Affecting Dissolved Oxygen Measurement
15.11 Appendix J – Discussion on Chemical Interferences on Measured DO Currents
15.12 Appendix K – Percent Saturation Readout
15.13 Appendix L – Leak Detection in PPB Applications
15.14 Appendix M – Procedure for Low Level ppb Dissolved Oxygen Testing
218
219
222
223
225
226
227
15.15 Appendix N – Sample Tap Electrode Mounting Recommendations 229
15.16 Appendix O – Auto Clean and Auto Cal Examples 231