Import/Export revision history Appendix B
Rockwell Automation Publication 1756-RM084S-EN-P - March 2015 259
• Information about when an imported file modifies a project so that you
cannot go online and access a previously downloaded controller.
• Additional values for the Mode attribute of a MODULE component.
• New SERCOS IDN Read and SERCOS IDN Write message types.
• New motion AXIS_GENERIC_DRIVE type.
• Removal of the DescriptionWidth parameter from the STEP,
TRANSITION, and STOP components in SFC logic.
• Addition of an Attributes column to the CSV format for exported tags.
Version 2.4, major revision 2, minor revision 4, of the import/export feature
included with Logix Designer, version 13 includes these major enhancements:
• Support for new controllers.
• ExtendedProp section to MODULE data.
• Support for new TAG attributes.
Attributes can be in any order in an import/export file. The order shown in
this document is the order the attributes export.
• Support for a TREND object in the import/export .L5K file.
• New MCSV instruction in ladder logic (chapter 4) and structured text.
• Online editing support for structured text and sequential function chart
logic.
• Updated CSV format now includes rung comments.
• New L5X format for partial import/export of ladder rungs, tags, and trends.
Version 2.3, major revision 2, minor revision 3, of the import/export feature
included with Logix Designer, version 12.01 includes these major enhancements:
• The structured text component changed from STX_ROUTINE
to ST_ROUTINE. The LanguageType attribute in SFC routines for
embedded structured text also changed from STX to ST.
• Support for new controllers.
• Addition of the ControlNetSignature attribute to the MODULE
component.
• Addition of the ProgrammaticallySendEventTrigger attribute to the TAG
component.
• New COORDINATE_SYSTEM tag.
• Addition of several new attributes to the axis tag types.
Import/Export version 2.4
Logix Designer version 13
Import/Export version 2.3
Logix Designer version 12
