Appendix B Import/Export revision history
266 Rockwell Automation Publication 1756-RM084S-EN-P - March 2015
Attribute Description
OutputScaling Specify the output scaling (any positive number).
Specify OutputScaling := value
OutputLimit Specify the output limit (any positive number).
Specify OutputLimit := value
OutputOffset Specify output offset (any positive number).
Specify OutputOffset := value
FrictionCompensation Specify friction compensation (any positive number).
Specify FrictionCompensation := value
SoftOvertravelFaultAction
Type Shutdown, Disable Drive, Stop Motion, or Status Only.
Specify SoftOvertravelFaultAction := text
PositionErrorFaultAction
Type Shutdown, Disable Drive, Stop Motion, or Status Only.
Specify PositionErrorFaultAction := text
EncoderLossFaultAction
Type Shutdown, Disable Drive, Stop Motion, or Status Only.
Specify EncoderLossFaultAction := text
EncoderNoiseFaultAction
Type Shutdown, Disable Drive, Stop Motion, or Status Only.
Specify EncoderNoiseFaultAction := text
DriveFaultAction
Type Shutdown, Disable Drive, Stop Motion, or Status Only.
Specify DriveFaultAction := text
ServoConfigurationBits Specify the servo configuration bits. Type a hexadecimal number.
Specify ServoConfigurationBits := 16#value
MotorEncoderTestIncrement Specify the motor encoder test increment (any positive number).
Specify MotorEncoderTestIncrement := value
TuningTravelLimit Specify the tuning travel limit (any positive number).
Specify TuningTravelLimit := value
TuningSpeed Specify the tuning speed (any positive number).
Specify TuningSpeed := value
DampingFactor Specify the damping factor (any positive number).
Specify DampingFactor := value
PositionServoBandwidth Specify position servo bandwidth (any positive number).
Specify PositionServoBandwidth := value
TuningConfigurationBits Specify the tuning configuration bits. Type a hexadecimal number.
Specify TuningConfigurationBits := 16#value
Version 1.1, major revision 1, minor revision 1, of the import/export feature
included with Logix Designer, version 8.0 includes these major enhancements:
• Function block instructions and routines.
• ASCII instructions.
• Verification of all instruction attributes and parameters.
Import/Export version 1.1
Logix Designer version 8
