Filter
Top Products
116
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
The "Default track name" menu item specifies the default track name for each track of a BWF
file created when recording is made.
The track name specified is automatically added to the track number whenever an audio file
is created. The data is recorded to each file as the "fTRKn" information of the BWF BEXT Chunk
Description. The default track name is stored in the System ROM of the unit.
When you highlight "Default Track Name" and press the [ENTER/YES] key on the SYS SETUP
menu screen, the current track name of each track is shown. By using the [MENU] dial to select
a track and pressing the [ENTER/YES] key, you are ready for entering the track name.
<Note>:
You can change track names of a file later by using the "Edit descriptor" func-
tion of the "File Info." menu item in the "DISK UTILITY" menu (see page 143).
The "Next event No." menu item sets the event number in the description information of an
audio file.
The event number is recorded to each file as "fEVENT" information in the BWF BEXT Chunk
Description. The setting is stored in the System ROM of the unit.
Select the "Next event No" menu item and press the [ENTER/YES] key.
The next event number setting starts flashing and you can now edit the number.
<Notes>
• The edited value is reflected to newly recorded audio files. It does not affect the
current audio file.
• If the event number exceeds 99999, the number returns to 00000.
Default track name setting [Default track name]
Next event number setting [Next event No.]
You can enter a desired scene name using the [MENU] dial or alphanumeric keys.
After entering the desired track name, press the [ENTER/YES] key to confirm your setting.
To exit the MENU mode, press the [STOP/HOME] key.
You can set the "Next event No." to a desired number between 00001 and 99999.
Use the [MENU] dial to enter the desired number and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.