Fostex DV824 DVD Recorder User Manual


 
31
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
3) [P2/ES BUSS/INPUT] connector
This connector is used for controlling the unit from an external video editor,
etc. The hardware specification is conformed to RS-422A.
The connector type is D-sub 9-pin, female.
4) Terminate switch (100, ON/OFF)
To terminate the [P2/ES BUSS/INPUT] connector, set this switch to ON.
5) [P2/ES BUSS/THRU] connector
This connector echoes the control signal received at the [P2/ES BUSS INPUT]
connector. See "[P2/ES BUSS INPUT] connector" above for the pin assignment.
The connector type is D-sub 9-pin, female.
6) Blank panels
When installing the optional TC/SYNC card and IEEE1394/USB card, remove
these panels.
7) Cooling fan
This fan ventilates the DV824.
If the ventilation is disturbed, the DV824 may overheat. Therefore, do not block
the vent of the cooling fan.
8) [DC IN 12V] connector
This connector is used to connect to the supplied AC adaptor (Model AD-15C).
The connector type is XLR-4-32.
1
2
3
4
5
6
7
8
Frame Ground
Transmit A
Receive B
Receive Common
Spare
Transmit Common
Transmit B
Receive A
1
6
5
9
9
Frame Ground
*Protocol: conformed to the Sony 9-pin protocol
T
R
+
-
A
B
A<B -> "1" (Mark)
B<A -> "0" (Space)
1
2
3
GND
NC
NC
1
2
3
4
4
12V
Controlled Device