Filter
Top Products
130
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
Using the "Gen Ubit" menu item, you can set the time code userbit value which is output from
the [TIME CODE OUT] connector when the "Sel TC Out" menu item is set to "Gen".
<Note>:
The "Gen Ubit" menu item setting is effective only when the optional TC/
SYNC card is installed. When it is not installed, "Void! No TC Card" is shown and you
cannot make setting.
<User>
MMDDYY00
DDMMYY00
BG_76:MM (month)/ BG_54:DD (day)/ BG_32:YY (year)/ BG_10:xx (US)
The default is 00 00 00 00 (default setting).
BG_76:DD (day)/ BG_54:MM (month)/ BG_32:YY (year)/ BG_10:xx (EUR)
User bit setting [Gen Ubit]
Options Details
Using the "JAM mode" menu item, you can select the jam mode for the generator "Free Run"
mode (You can set which information is jammed).
<Note>:
The "JAM mode" menu item setting is effective only when the optional TC/
SYNC card is installed. When it is not installed, "Void! No TC Card" is shown and you
cannot make setting.
BOTH
TC
UBIT
Only time code data is jammed. For userbit, the userbit data of the internal generator is
used.
Both time code and userbit data are jammed (default setting).
Only the userbit data is jammed. For time code, the time code data of the internal generator
is used.
Jam mode setting [JAM mode]
Options Details
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
Select the "JAM mode" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting. Press the [STOP/HOME] key to exit the MENU mode.
Select the "Gen Ubit" menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.