Fostex DV824 DVD Recorder User Manual


 
144
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
The sound sequence information of a BWF file includes items as below and you
can edit them if necessary. "<New line>" at the bottom is used for adding a new
descriptor information. See "Adding descriptor information" for details.
The table below shows the details of the descriptor information which Fostex
registers by default, as shown on the screen example above.
The information can be used for creating an AVID ALE file, as well as can be
directly exported to the AVID system via IEEE 1394 (or via a disk).
<Note>:
Each character string before "=" shows the "header ID" of currently
available meta data.
Line No.
Contents Details
01
02
03
04
05
06
07
08
fUBITS=$
fSCENE=**********
fTAKE=***
fTAPE=**********
fEVENT=*****
fTRK1=**********
fTRK2=**********
fNOTE=
The user bit used when recording time code is recorded
by default.
When creating a file, the character string before "-" in the
file name is set as a SCENE by default.
When creating a file, the three-digit number between "-"
and the file extension in the file name is set as a TAKE
number by default.
When creating a file, the reel number (volume label) on
the disk is set as a TAPE number (up to 8 digits) by de-
fault.
The five-digit number set by the "Set Next Event" menu
item in the "System Setup" menu of the MENU mode is
set as an EVENT number by default.
Track name of each track.
A default track name (up to 16 characters) for each track
is recorded.
The screen above shows the example when the record-
ing mode is set to stereo (2-track). The number of lines
increases when recording more tracks.
This is used for comment. By default, no data exists.