Filter
Top Products
76
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
• Sub net mask setting
The "Sub net mask" item sets the sub net mask value in the network DV824 exists. In the
case the Sub net mask is not used, you do not have to set this value.
By selecting "Sub net mask" and pressing the [ENTER/YES] key, the current Sub net
mask is shown (by default, "255. 255. 255. 0.").
By pressing the [ENTER/YES] key again, the leftmost three-digit number starts flashing.
You can now enter the desired value using the [MENU] dial (or alphanumeric keys),
while you can move the cursor using the [SKIP/CURSOR ] key.
TCP/IP SETUP menu setting
To connect the DV824 [ETHERNET] port to a PC. make settings of the "TCP/IP SETUP" menu in
the MENU mode appropriately. See below for details of how to make "TCP/IP SETUP" menu
settings.
1) While the unit is stopped, press the [ENTER/YES] key to enter the MENU mode.
2) Use the [MENU] dial to select "TCP/IP SETUP" and press the [ENTER/YES] key.
The display now shows the screen for selecting the menu item.
• IP address setting
The "IP Address" menu item sets the IP Address on DV824.
By selecting "IP Address" and pressing the [ENTER/YES] key, the current IP address is
shown (by default, "192. 168. 1. 188.").
By pressing the [ENTER/YES] key again, the leftmost three-digit number starts flashing.
You can now enter the desired value using the [MENU] dial (or alphanumeric keys),
while you can move the cursor using the [SKIP/CURSOR ] key.
After completing editing, press the [ENTER/YES] key to confirm the setting.
After completing editing, press the [ENTER/YES] key to confirm the setting.
3) Use the [MENU] dial to select a desired menu item and press the [ENTER/YES] key.
You can now edit the menu item (see below for details).