Filter
Top Products
80
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
Time code recording/playback (the optional Model 8348 required)
Frame rate setting
You can select the desired frame rate via the quick setup mode, as
described on page 46. (You can also select the frame rate via the "Frame
Rate" menu item in the "TC SETUP" menu of the MENU mode. See page
127.)
<Note>:
When recording external time code, you can view time value and
frame rate of external time code by selecting the time mode to "TC IN" using
the [TIME SEL] key.
TC generator mode setting
Depending on the TC generator mode, the unit records time code
differently.
You can select the desired TC generator mode via the quick setup mode,
as described on page 47. (You can also select the TC generator mode via
the "Gen Mode" menu item in the "TC SETUP" menu of the MENU mode.
See page 128 for details.) The following four generator modes are available.
24H Run
Rec Run
Free Run
EXT Run
When recording, the unit records time code based on the current internal
RTC (real-time clock) time.
When recording, the unit records time code which continues from the last
time code value of the previous audio file.
If you change to a new disk which does not have any audio file and make
recording, the unit records time code which continues from the last time
code value of the most recent audio file on the disk previously set.
When recording, the unit records time code generated by the internal gen-
erator which runs freely.
When recording, the unit records the incoming external time code.
<Note>:
You can make settings for time code recording/playback via the "TC SETUP"
menu on the MENU mode.
See page 125 for details
.
Recording time code
By installing the optional TC/SYNC card (Model 8348) to the DV824, you can record
time code generated by the internal TC generator along with audio signals, or record
incoming external time code. Furthermore, you can record internal generator time
code which jams to external time code.
BI-PHASE INPUT
INPUT
OUTPUT
ANALOG OUTPUT BALANCED [+4dBu]
ANALOG INPUT BALANCED [+4dBu]
1:GND
2:NC
3:NC
4:12V
THRU
INPUT
ON OFF
100‰
876
543
21
1
2345
6
7
DC-IN 12V
P2/ES BUSS
8
INPUT
OUTPUT
OFF
75‰
REMOTE
PARALLEL
TIME CODE
LEVEL SEL
24V5V
WORD(VIDEO)
WORD
1:GND 2:HOT 3:COLD
ON
LINKTX/RX
ETHERNET
DIGITAL I/O AES/EBU
Time code input
Time code output