Filter
Top Products
24
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
Front panel
DVD RECORDER
EVEN
TR ODD-
MONO
POWER
SOLO
TR1
TR2
TR3
TR4
(KYBD ONLY)
PHONES
MIN MAX
USB
TR1-2
TR3-4
TR5-6
TR7-8
TR8
TR7
TR5
TR6
HMSF
5678
0L
-dB
60
4
16
30
40
1234
DF
GEN
ABS
TC IN
0
LTC
12
8
18
20
SLATE TONE
+
-
EDIT TIME
FALSE START
SKIP/CURSOR
CLEAR
LOCATE
TUV
8
WXYZ
9
ALL INPUT SAFE/RDY
LIST PLAY
JKL
5
EDIT EDL
PUSH
MENU/ENTER/YES
MNO
6
CHASE
DEF
3
2
ABC
QUICK SET FILE SEL
PRE REC
EXIT/NO
DRV/PAT
SHIFT
space
GHI
4
1
TIME SEL
7
PQRS
CONTRAST
MARK/CUE
symbol
0
REC END
ABS 0
RECORD
STOP/HOME
F FWD
REWINDPLAY
OPEN/CLOSE
DVD
HD
ACCESS
1
2
34
5
6
7
8
9
11
10 12
13
14 15 16
1718
19
20
21
22
23
24
252627
About Non-shift mode and Shift mode
*Some keys have the secondary function which is available when the SHIFT indi-
cator is lit (i.e. in the Shift mode), while the primary function is available when
the SHIFT indicator is unlit (i.e. in the Non-shift mode).
In this manual, we sometimes say "when SHIFTed" and "when unSHIFTed", in-
stead of "when the SHIFT indicator is lit" (or "in the Shift mode") and "when the
SHIFT indicator is unlit" (or "in the Non-shift mode") respectively.
1) [POWER] switch
Turns on or off the power of the unit.
2) Disk tray
Loads a DVD-RAM disk. Use the [OPEN/CLOSE] key to open or close the tray.
See page 18 for details about DVD-RAM disks which can be used with the unit.
3) [ACCESS] indicators
Indicates the condition of the current (currently selected) drive.
When the DVD-RAM drive is selected, "DVD" indicator is lit. When any partition
of the optional hard disk drive is selected, "HD" indicator is lit. When the
optional hard disk drive is installed and file copy or disk copy between drives is
being executed, both the indicators are lit.
Depending on the drive condition, the color of the indicator changes as below.
• Lit in green: The drive is selected as the recording medium.
• Lit in orange: Now reading data.
• Lit in red: Now writing data.
4) Level meters
Show the recording/playback level of tracks 1 through 8.
5) 7-segment time display
Shows time data in the currently selected time mode. You can select the time
mode using the [TIME SEL/
CONTRAST
] key (See page 51 for details).