Filter
Top Products
88
9-1 EXTRA LINE DATA RECORDING/PLAYBACK
9 OTHER FUNCTIONS
Extra line data playback
The menu switches below are used to select whether or not the extra line information
should be added to the video signal during playback, and if so, how it should be
added.
1. Select how the extra line information is to be added to the playback video
signal with menu switch No. 143 <EXTRA LINE PB>.
●Menu switch indication for
extra line
NTSC: (525) is displayed
after the menu
switch name.
PAL : p is displayed after
the menu switch
number and (625) is
displayed after the
menu switch name.
●For details of menu
switches No. 143 to No.
147, refer to page 47–48.
●When menu switch No. 128
<PB EXTENSION LINE> is
set to “ON”, the extra line
information in the video
signal line is not output.
MUTING (0)
AUTO (1)
USER SETTING
(3)
Extra line information is not added to output video
signals. Factory setting.
When video signals are output, extra line
information is added to the line selected for extra
line recording.
When video signals are output, extra line
information is added to the two user-specified lines.
Color signal data is output on two lines and black-
and-white signal data is output on four lines.
To specify the lines for color signals, set menu
switches No. 144 and No. 145. For black-and-white
signals, specify the lines with menu switches No.
144 to No. 147.
2. Select a line on which extra line information should be added to the
playback video signal when USER SETTING (3) is selected in Step 1.
● Set the line for extra line-1 information with menu switch No. 144 <EXTRA-L
P1 SEL> (color or black-and-white signal).
● Set the line for extra line-2 information with menu switch No. 145 <EXTRA-L
P2 SEL> (color or black-and-white signal).
● Set the line for extra line-3 information with menu switch No. 146 <EXTRA-L
P3 SEL> (black-and-white signal only).
● Set the line for extra line-4 information with menu switch No. 147 <EXTRA-L
P4 SEL> (black-and-white signal only).
Notes on the extra line
user setting
●Extra line information is not
output if the selected lines
are the same as those set
with menu switch No. 400
and No. 401.
89
9 OTHER FUNCTIONS
9-2 EXTRA LINE, VITC LINE, V. BLANK MASK and PB EXTENSION LINE settings
Setting range and priorities for the following menu switches are shown below.
No. 138 to 147 EXTRA LINE, No. 601 V. BLANK MASK, No. 400 to 401 VITC LINE SELECT and No. 128 PB
EXTENSION LINE.
Ⅵ NTSC
Ⅵ PAL
523 524 525 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
[525] LINE No.
SYNC
VITC SETTING RANGE
EXTRA LINE SETTING RANGE
V. BLANK MASK SETTING LINE
EXTENSION SETTING LINE
V. BLANK MASK ON
V. BLANK MASK ON WITH 0.5H
Priority
High
Low
261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290
[525] LINE No.
SYNC
VITC SETTING RANGE
EXTRA LINE SETTING RANGE
V. BLANK MASK SETTING LINE
EXTENSION SETTING LINE
V. BLANK MASK ON
V. BLANK MASK ON WITH 0.5H
Priority
High
Low
Analog output signal is masked.
620 621 622 623 624 625 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
[625] LINE No.
SYNC
VITC SETTING RANGE
EXTRA LINE SETTING RANGE
V. BLANK MASK SETTING LINE
EXTENSION SETTING LINE
V. BLANK MASK ON
V. BLANK MASK ON WITH 0.5H
Priority
High
Low
Analog output signal is masked.
308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337
SYNC
VITC SETTING RANGE
EXTRA LINE SETTING RANGE
V. BLANK MASK SETTING LINE
EXTENSION SETTING LINE
V. BLANK MASK ON
V. BLANK MASK ON WITH 0.5H
Priority
High
Low
[625] LINE No.