Filter
Top Products
94
9-6 STRIPING REC Function
9 OTHER FUNCTIONS
When preparing a tape for editing, you can use this function to record the video signals, time code and user bits
set with the <STRIPING REC MENU> on the entire tape.
Operation
1. If the [RECORDER] or [PLAYER] button is illuminated, press the button so
that it goes off.
2. Press the [REMOTE] button to select the “LOCAL” mode for local
operation.
3. Press the [REC] button while holding down the [SHIFT] button to open the
<STRIPING REC MENU>.
[ The current settings are displayed on screen and the counter display.
●The [REC] button blinks.
●The Stop mode is engaged if the tape is running.
4. Load a cassette tape.
[ When the [REC] switch on the cassette is set to “OFF”, “REC INH” blinks on
screen.
5. Change the settings if required.
●Refer to the menu setting contents and procedures on page 95. The settings
are retained even if the power is turned off.
6. Press the [PLAY] button while holding down the [REC] button to start
STRIPING REC.
[ The tape is rewound automatically to the beginning and recording starts.
●During rewind, the [REC] and [REW] buttons blink alternately.
●When recording starts, the blinking “STRIPING” indication lights. The
[PLAY] and [REC] buttons blink simultaneously.
●When the end of the tape is reached, “Complete” is shown on the counter
display, the tape is automatically rewound to the beginning and STRIPING
REC ends.
●The following settings which are automatically set with the STRIPING REC
are reset to the original settings when STRIPING REC is complete.
• VIDEO INPUT] button
• [COUNTER] button
• TIME CODE] (INT/EXT, REC/FREE, PRESET/REGEN) switches
• Menu switch No. 111 <VD REC SIGNAL SEL.>
• If menu switch No. 457 <UB AUTO PRESET> is set to “ON”, the registered
user bit data is restored.
• Audio muting is released.
7. Press the button on the front panel as required so that the “Complete”
indication goes out.
<STRIPING REC MENU>
BLACK
(MUTING)
00:58:00:00
00 00 00 00
START
EXIT
V
AUD.SOURCE
TCG PRESET
UBG PRESET
SOURCE D.I
REC+PLAY
STOP
REC INH
M
H
F
S
CONDITION
CTL
P.READ
AUTO
OFF
V.VAR
REMOTE
PB/EE
16:9
TC
UB
DF
SERVO
GENCF
AP
525
625
●
After this operation, all
buttons except for
[EJECT], [STOP] and
[REC] buttons have no
effect.
●
When the [STOP] button
is pressed in this step,
the menu is closed and
the STRIPING REC
mode is released.
●
Audio signals are not
recorded.
●
Editing operations such
as assembly and insert
cannot be executed. If
an operation other than
the current mode is
executed, for example
when the [PLAY] button
is pressed during rewind,
STRIPING REC ends.
●
When another operation
is performed during
recording ([REC] +
[PLAY]), STRIPING REC
ends.
95
Non-drop frame/drop
frame indication (NTSC
only)
Set with the menu
switch No. 416.
Drop frame:
00:00:00
•
00
Non-drop frame:
00:00:00:00
●
Dropped data cannot be
set in the Drop Frame
mode. Data has 2
frames which are added
(in the Drop Frame
mode).
Menu setting details
On screen Counter
VID. SOURCE Video BLACK
AUD. SOURCE
TCG PRESET 00:58:00:00
UBG PRESET 00 00 00 00
Contents
Selects the video signals to be recorded. If non-
input signals are selected, the indication blinks.
BLACK:Selects the built-in black signal. The built-in
color bar signal cannot be selected.
SIF :Selects the AES/EBU signals. This cannot
be selected if the SA-D95U is not installed.
LINE :Selects composite signals.
CPN :Selects component signals.
Muting is always on. Setting is not possible.
Presets the time code.
Presets the user bits.
Settings
BLACK
SIF
LINE
CPN
(MUTING)
Desired value
Desired value (0 - F)
Setting
1. Open the <STRIPING REC MENU>.
Press the [REC] button while holding down the [SHIFT] button.
2. Turn the jog dial to select the item to be set.
3. Change the setting.
●
VID. SOURCE: Selecting the video signals
While pressing the [SEARCH] button, turn the jog dial to select the signal.
●
TCG PRESET: Setting the time code
1. Press the [HOLD] button.
[ The digit for the time code blinks.
2. Select the digit with the jog dial.
[ The selected digit blinks.
3. While pressing the [SEARCH] button, turn the jog dial to change the
numeric value.
●
To cancel the setting, press the [HOLD] button.
[ The menu item selection menu is restored.
●
To set all digits to 0, press the [RESET] button.
4. Press the [SET] button to register the setting.
●
UBG PRESET: Setting the user bits
1. Press the [HOLD] button.
[ The digit for user bits blinks.
2. Select the digit with the jog dial.
[ The selected digit blinks.
3. While pressing the [SEARCH] button, turn the jog dial to change the
numeric value.
●
To cancel the setting, press the [HOLD] button.
[The menu item selection menu is restored.
●
To set all digits to 0, press the [RESET] button.
4. Press the [SET] button to register the setting.
4. End menu setting.
It is not necessary to end menu setting to start STRIPING REC right away.
Press the [STOP] button to close the menu and restore normal operation.
9-6 STRIPING REC Function
9 OTHER FUNCTIONS