Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
10-8 Polycom, Inc.
4 Click the Advanced tab.
The New Profile – Advanced dialog box opens.
5 Define the following parameters:
Video Switching If the Operator Conference option is selected, this option is disabled,
and the selection is cleared. For more information, see "Video
Switching (VSW) Conferencing” on page 2-4.
Operator Conference Select this option to define the profile of an Operator conference.
An Operator conference can only be a Continuous Presence
conference, therefore when selected, the High Definition Video
Switching option is disabled and cleared.
When defining an Operator Conference, the Send Content to Legacy
Endpoints option in the Video Settings tab is cleared and disabled.
Table 10-1 New Profile - General Parameters (Continued)
Field/Option Description
Table 10-2 New Profile - Advanced Parameters
Field/Option Description
Encryption Select this check box to activate encryption for the conference. For
more information, see "Media Encryption (AVC Only)” on page 4-40.
LPR When selected (default for CP conferences), Lost Packet Recovery
creates additional packets that contain recovery information used to
reconstruct packets that are lost during transmission.
LPR is automatically disabled if High Definition Video Switching is
selected. For more information, see "Packet Loss Compensation
(LPR and DBA)” on page 4-50.