Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
I-36 Polycom, Inc.
If the TIP Compatibility Mode was set to Video and Content, the Send Content to
Legacy Endpoints disabled. This setting cannot be changed.
g Set the Telepresence Mode to Auto.
16 Configure a Virtual Meeting Room (VMR) on the DMA
The procedures for configuring DMA are described in detail in the Polycom Unified
Communications Deployment Guide for Cisco Environments.
Endpoints
17 Configure HDX endpoints to register to Lync Server.
The procedures for configuring HDX endpoints are described in detail in the
Polycom Unified Communications Deployment Guide for Microsoft Environments.
18 Configure H.323 endpoints to register to DMA as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom
Unified Communications Deployment Guide for Cisco Environments.