Filter
Top Products
Chapter 23-RMX Hardware Monitoring
Polycom, Inc. 23-37
MPM+ Card Properties
To view the MPM+ Properties:
1 In the Hardware Monitor pane, right-click the MPM+ entry and then select Properties.
2 Click Active Alarms.
Figure 23-9RealPresence Collaboration Server (RMX) 2000 MPM+80 Properties
The MPM+80 card has 7 temperature sensors numbered: 11-17. For example, when sensor
14 reaches 70
° (degrees) Centigrade, it triggers an "Upper Major" event.
The "Upper Major" event results in an alarm being triggered. Perform an overall system
check. If a temperature sensors reaches and passes "Upper Critical" then the Shelf Manager
initiates a shutdown on the over-heated CNTL card.
The MPM+ card does not support version 7.6.1 features or look & feel.
Right clicking on any RMX MPM+ card will display the cards Properties.
The Sensor numbering and Temperature listings may vary on RMX systems depending on
card’s Hardware Version and Software Version number. The RMX Manager and RealPresence
Collaboration Server Client version can also affect the UI or change the look & feel.