Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
H-36 Polycom, Inc.
Configuring the RMX 1500/2000/4000 for Microsoft
Integration
The MCU is integrated in Microsoft Office Communications Server R2 (Wave 13) and
Microsoft Lync Server environments by setting its Transport Type (in the SIP server
configuration) to TLS and creating a certificate that is sent to the MCU. This procedure is
also required when encryption of SIP signaling is used.
In addition, if the DNS server was not enabled in the Network Management Service on the
MCU, it must be enabled for the integration in Microsoft Office Communications Server (R2,
Wave 13) and the Lync Server (Wave 14) environments.
Modify the MCU Management Network Service to Include the DNS Server
The Management Network that is defined during first entry setup does not include the
definition of the DNS which is mandatory in Microsoft environment and has to be modified.
To add the definition of the DNS to the Management Network in the MCU:
1 Using the Web browser, connect to the MCU.
2 In the MCU Management pane, expand the Rarely Used list and click IP Network
Services ().
3 In the IP Network Services pane, double-click the Management Service .
The Management Network Properties - IP dialog box opens.
4 Click the DNS tab.
5 In the DNS field, select Specify to define the DNS parameters.
From Version 7.0.x, Microsoft R1 is not supported with MCU systems.
In Multiple Networks configurations, A DNS server can be specified for each IP Network Service and
for the RMX Management Network Service.