Filter
Top Products
Appendix I-Polycom Open Collaboration Network (POCN)
Polycom, Inc. I-37
19 Configure SIP endpoints to register to:
• DMA as SIP Proxy
• Lync Server as SIP Proxy
• CUCM as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom
Unified Communications Deployment Guide for Cisco Environments.
20 Configure TIP endpoints to register to:
•DMA
•CUCM
The procedures for configuring TIP- enabled endpoints are described in detail in the
Polycom Unified Communications Deployment Guide for Cisco Environments.
Content
Endpoint Registration and Dialing Method affect the Video and Content Sharing characteristics
of the conference as detailed in Table I-4.
Table I-4 Video and Content
Dialing Method
Endpoint Registration
Lync CUCM DMA
ITP /HDX
RTV Key is required for
HDX and ITP
ITP /HDX
TIP Key is required for HDX
ITP /HDX
TIP Key is required for HDX
HDX to MCU
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE
• HD H.264 Video
• No Content
• ICE not supported
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE not supported
Lync to MCU
• HD Video (RTV)
• No Content Sharing
• Content sent to Lync using Content for Legacy Endpoints
(Not supported in ITP Mode)
CTS to MCU
• HD1080p30
• TIP Content Sharing
• Content: XGA,5fps