Filter
Top Products
Chapter 21-RealPresence Collaboration Server (RMX) Administration and Utilities
Polycom, Inc. 21-35
11 Click the Add button to add a new Manager terminal.
The New Trap Destination dialog box opens.
12 Type the IP Address and the Community name of the manager terminal used to
monitor the MCU activity, and then click OK.
The Community name is a string of characters that will be added to the message that is
sent to the external Manager terminals. This string is used to identify the message
source by the external Manager terminal.
The new IP Address and Community name is added to the Trap Destinations box.
a To delete the IP Address of a Manager terminal, select the address that you wish to
delete, and then click the Remove button.
The IP address in the Trap Destinations box is removed.
13 Click the Security tab.
Trap Destination This box lists the currently defined IP addresses of the Manager
terminals to which the message (trap) is sent.
IP Enter the IP address of the SNMP
trap recipient.
All
Versions
Community
Name
Enter the Community Name of the
manager terminal used to monitor
the MCU activity
Version 1
and
Version 2
User Name Enter the name of the user who is to
have access to the trap.
Version 3
Authentication
Protocol
Enter the authentication protocol:
MD5 or SHA.
Privacy
Protocol
Enter the privacy protocol: DES or
AES.
Table 21-2 SNMPv3 - Traps (Continued)
Field Description