Filter
Top Products
Chapter 2-Conference Profiles
Polycom, Inc. 2-61
11 Click OK to complete the Profile definition.
A new Profile is created and added to the Conference Profiles list.
CP Conferencing Additional Information
Overlay Layouts
Overlay Layouts allow additional participant endpoints to be displayed in 1x1 conference
Video Layouts. The following Overlay Layouts are available:
Guidelines
•The Overlay Layouts are supported:
— With MPMx cards only.
— In RMX CP mode only.
— With ITP, non-ITP and CTS endpoints. Support of ITP and CTS requires MLA as a
system component. (For more information see the Polycom® Multipoint Layout
Application (MLA) User’s Guide for Use with Polycom Telepresence Solutions).
— With both new and old Skins in RMX CP mode. Skins do not apply to ITP
conferences.
•The Overlay Layouts are 20% of the height of the endpoint display and are supported on
endpoints of both 16:9 and 4:3 aspect ratios.
• Overlay Layouts are recommended for use with high resolution endpoints.
Accept Calls To prevent dial in participants from connecting to a conferencing
entity when connecting via a Network Service, clear the check box of
the Network Service from which calls cannot connect to the
conference.
Table 2-26 New SVC Profile - Network Services Parameters (Continued)
Parameter Description
Overlay Cell: Telepresence (ITP) Room
OTX/RPX (2-4 screens)
Overlay Cell(s): 1, 2 or 3Standalone Endpoints