Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-4 Polycom, Inc.
ENABLE_AGC Set this flag to YES to enable the AGC option. (Default setting
is NO.) When disabled, selecting the AGC option in the
Participant Properties has not effect on the participant audio.
For more information see "Managing the Address Book” on
page 8-7.
The Auto Gain Control mechanism regulates noise and audio
volume by keeping the received audio signals of all
participants balanced.
Note:
Enabling AGC may result in amplification of background
noise.
ENABLE_AUTO_EXTENSIO
N
When set to YES, allows conferences running on the RMX to
be automatically extended as long as there are participants
connected and the system has free resources.
Set this flag to NO prevent conference duration from being
automatically extended. It can also be used to enable the
definition of conference duration that is shorter than is 11
minutes for the RealPresence Collaboration Server (RMX)
1500 and 20 minutes for the RMX 2000/4000.
Default: YES
ENABLE_CASCADED_LINK
_TO_JOIN_WITHOUT_PASS
WORD
Enables a cascaded link to enter a conference without a
password.
Default: NO, for security reasons.
ENABLE_CYCLIC_FILE_SY
STEM_ALARMS
Enables or disables the display of Active Alarms before
overwriting the older CDR/Auditor/Log files, enabling the
users to backup the older files before they are deleted.
Default: NO
Default (ULTRA_SECURE_MODE=YES): YES
ENFORCE_SAFE_UPGRAD
E
When set to YES this flag enables the RMX system to notify
users when an incorrect version upgrade/downgrade or
upgrade/downgrade path is selected.
When set to NO, after initiating an upgrade or downgrade
software installation, the RMX activates a fault alert in the
Faults List: “Warning: Upgrade started and SAFE Upgrade
protection is turned OFF” and the upgrade/downgrade
process continues.
Range: YES / NO
Default: YES
EXT_DB_IVR_PROV_TIME_
SECONDS
When an Entry Queue is set as IVR Service Provider for the
DMA, the value here indicates the time interval in seconds in
which the database is accesses for the ID.
Default: 300
Table 22-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description