Filter
Top Products
120 English
GENERAL SET3
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
Settings are required when the RS-485 terminals (A and B)
are connected with a system controller or other devices.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “3.GENERAL
SET” and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3 Turn the jog dial to select “4.RS-485
SET” and then turn the shuttle dial
clockwise.
The <RS-485 SET> screen is displayed.
4 Turn the shuttle dial clockwise.
“19200” flashes for “DATA SPEED”.
5 Turn the jog dial to select the “DATA
SPEED” setting and then turn the
shuttle dial clockwise.
The cursor moves to “STATUS INFO”.
[Settings] ( indicates default setting)
6 Turn the shuttle dial clockwise.
“OFF” flashes for “STATUS INFO”.
7 Turn the jog dial to select “STATUS
INFO” and then turn the shuttle dial
clockwise.
The cursor moves to “ALARM INFO”.
[Settings] ( indicates default setting)
Setting RS-485
MENU
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
Setting Description
2400, 4800, 9600, 19200 Sets the data speed.
Setting Description
ON Status information is transmitted.
OFF Status information is not transmitted.
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : OFF
ALARM INFO : OFF
ADDRESS : 001