Filter
Top Products
16 English
INSTALLATION AND CONNECTIONS3
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
Connect to a PC for control of the digital video recorder over a
network with a switch or connect to the Internet.
To enable control of the digital video recorder over a network,
connect to the switch via Ethernet cable or make a similar
connection.
You may use either a straight or cross type Ethernet cable.
Connect to the Internet via a router or similar device.
When connecting to a router, you may use either a straight or
cross type Ethernet cable.
To connect to an ADSL modem and other devices, be sure to
read the instruction manuals for each connected device.
Connect a microphone and speakers via an amplifier in order
to input or output audio.
When using external alarms (i.e., intruder sensors), connect
external switches to the ALARM IN terminals.
Only terminals 1 to 9 are available on the DSR-5709P.
Connecting a LAN terminal
LAN connection
Internet connection
Switch
Ethernet cable
PC
Internet
Router, ADSL
modem, etc.
Ethernet cable
Connecting an amplifier
Connecting alarm input terminals
IN OUT
AUDIO
Audio input
terminal
Audio output
terminal
Amplifier
(sold separately)
1
16
Connect external
switches to ALARM IN
terminals.