Filter
Top Products
186 English
INITIAL SET2
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
Synchronized operations cannot be performed when the
clocks on the digital video recorder and the connected
peripheral devices differ. By setting the external clock as
described here, all devices connected to the clock adjust
terminal can be synchronized to the same time.
7 For “ADJUST TIME”, set the time at
which the clocks are to be
synchronized.
When time signal is input through the “CLOCK IN” terminal on
the rear panel, the internal clock of the digital video recorder is
automatically adjusted according to the time signal.
z If you use this function, connect the digital video recorder
to an external device that provides accurate time signal.
z If the time between the input time from the external signal
and the time set on the digital video recorder is 30 minutes
or longer, time adjustment does not take place.
z If you do not use this function, leave the initial setting
(OFF) unchanged to prevent malfunction.
8 Click [SAVE].
The setting is saved.
Use the following procedure to set specific days as holidays.
When a day is specified as a holiday, timer recording for that
day is performed as if it were a Sunday.
Dates such as national holidays and company holidays can be
set as holidays when you want those dates to have the same
security as Sundays.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “1. INITIAL SET”.
The “INITIAL SET” screen is displayed.
3 Click “3. HOLIDAY SET”.
The “HOLIDAY SET” screen is displayed.
4 Specify the days to be treated as
holidays.
Left column: Day, Right column: Month
A maximum of 20 different days can be specified as holidays.
5 Click [SAVE].
The setting is saved.
z If “DLY” is set using timer settings, timer recording on the
above-mentioned holidays is also performed in accordance
with daily settings. In other words, “DLY” includes Sundays
and is given priority over other settings.
z If a day is selected in February, April, June, September or
November that does not exist (see table below), this is
changed automatically to the last day of the month. No
distinction is made between leap years and normal
calendar years.
Setting the external clock
3. HOLIDAY SET
Month Non-existent day
Day changed to
(last day of the
month)
2 30, 31 29
4, 6, 9, 11 31 30
1 11
:
-
-
-
-
-
-
-
-
-
-
2 12
:
3 13
:
4 14
:
5 15
:
6 16
:
7 17
:
8 18
:
9 19
:
10 20
:
HOLIDAY SET
SAVE
4
5