Filter
Top Products
ADVANCED MENU SET9
English 209
Set when cameras with remote operation capability are
connected.
Perform the following connections and set camera control to
use in full screen display.
Connections necessary for remote operation:
z Connect coaxial control cameras to the VIDEO terminal.
z Connect the Sanyo RS-485 control camera to the RS-485
terminal (RJ-11).
z Connect the other companies’ RS485/422 control camera
to the 2ND RS485/422 terminal.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “8. ADVANCED MENU SET”.
The “ADVANCED MENU SET” screen is displayed.
3 Click “2. CAMERA CONTROL SET”.
The “CAMERA CONTROL SET” screen is displayed.
The DSR-5709P displays only nine channels.
4 Set “PROTOCOL” to the protocol
corresponding to the dome camera.
[Settings] ( indicates default setting)
5 The address (000 to 127) is displayed in
“ADD”.
When “SANYO RS-485” or “2ND RS-485/422” is specified as
the protocol, the address is displayed automatically.
6 In “ACTION”, specify the interlocking
operation of the camera when an alarm
is detected.
You can configure the camera to automatically change lens
orientation, auto-pan or tour on alarm detection.
[Settings] ( indicates default setting)
z For “PRESET”, you can set “PRESET2-9” with DSR-5709P
and “PRESET2-16” with DSR-5716P.
z Actually available actions depend on each camera. For
more information, refer to the camera's instruction manual.
7 Use the same procedure to set the other
channels.
8 Set “2ND RS-485/422 PROTOCOL”.
[Settings] ( indicates default setting)
OFF, BBV, KALATEL, PELCO, SENSORMATIC
9 Set “DATA SPEED”.
[Settings] ( indicates default setting)
9600bps, 4800bps, 2400bps
10 Click [SAVE].
The setting is saved.
2. CAMERA CONTROL SET
Setting Description
OFF No protocol
SANYO RS-485 SANYO RS-485
BBV COAX
BBV COAX
(Also supports AUX commands.)
PELCO COAX PELCO COAX
2ND RS-485/422 2ND RS-485/422
COAX (H-SSP) COAX (H-SSP)
5
4
8
10
6
9
Setting Description
OFF No action triggered.
PRESET
Moves the camera lens to the angle
corresponding to your selected preset
number.
PAN Starts automatic panning.
TOUR Starts tour.
SEQUENCE Starts sequence.