Filter
Top Products
32 English
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
4 PLAY
Use the following procedure to play normal or timer recording video stored in the hard disk.
1 Press the [CAMERA SELECT] button for
the camera to play and then press the
[PLAY/STOP] button.
The PLAY/STOP indicator lights up and appears in the
operation display. Normal or timer recording video is played
back. To view video from another camera, press the
[CAMERA SELECT] button of the desired camera.
z Video playback begins at the playback point where the
previous recording ended.
z If the playback point has been reset, video playback begins
from the earliest recording.
z If playback is stopped, the playback point is reset and
playback resumes from that point when the [PLAY/STOP]
button is next pressed.
z When playback ends, the operating display automatically
indicates that playback is paused ( ) and the STILL
indicator lights up.
z Playback video and audio may not be in sync.
In this case, press the [PLAY/STOP] button and play back
again.
2 Press the [PLAY/STOP] button to end
playback.
Playback ends.
Playing video near the point of recording
The digital video recorder priorities recording operations, and
as a result, video playback may pause temporarily.
1 Turn the shuttle dial clockwise or
counter-clockwise during video
playback.
Turn the shuttle dial to use fast-forward and fast-rewind
playback.
When turned clockwise, appears in the operation display
and fast-forward playback begins.
When turned counter-clockwise, appears in the operation
display and fast-rewind playback begins.
Fast-forward and fast-rewind speed increase the more the
shuttle dial is turned.
Return the shuttle dial to continue normal playback.
z Press the [SHUTTLE HOLD] button while either or is
displayed to fix the speed of fast-forward or fast-rewind
playback without having to hold the shuttle dial.
Press the [SHUTTLE HOLD] button again to continue
normal playback.
(1) Performing fast-forward.
When the jog dial is turned clockwise, fast-
forward playback begins and appears in
the operation display.
Fast-forward speed increases the more the
jog dial is turned clockwise and decreases
as it is returned.
(2) Performing slow playback.
When the jog dial is turned counter-
clockwise, slow playback begins and
appears in the operation display.
Slow playback speed decreases the more
the jog dial is turned counter-clockwise and
increases as it is returned.
[PLAY/STOP] button
Shuttle dial
Jog dial
[SHUTTLE HOLD] button
POWER indicator
[CAMERA SELECT] button
[STILL] button[PLUS] button
[MULTI] button
[ZOOM] button
[QUAD] button
Playing video on a full screen
02
01-01-07 00:00:00 EN A
Operation
display area
PLAY/STOP
PLAY/STOP
Fast-forward and fast-rewind
playback
Changing the playback speed
Starting fast-forward or slow playback