Filter
Top Products
200 English
GENERAL SET4
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
z If settings are changed during network control, the
connection is terminated.
z If a value other than “80” is set as the default value for the
port, when specifying the URL, enter a colon (:) and then
the port number after the IP address.
For example, if the port number is set as “60001”, enter
http://192.168.0.1:60001/
5 Click [SAVE].
The setting is saved.
z If settings are changed during network control, the
connection is terminated.
1 Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2 Click “3. GENERAL SET”.
The “GENERAL SET” screen is displayed.
3 Click “8. NETWORK CONTROL SET”.
The “NETWORK CONTROL SET” screen is displayed.
4 Set “NETWORK STATUS” to “ON” or
“OFF”.
[Settings] ( indicates default setting)
8. NETWORK CONTROL SET
Setting Description
ON
During network connection, the message
“NETWORK CONTROL” is displayed on the
monitor connected to the digital video recorder.
OFF
The message “NETWORK CONTROL” is not
displayed on the monitor connected to the digital
video recorder even during network connection.
NETWORK CONTROL SET
SAVE
OPERATION AUTHORITY
CHANGE
:
ENHANCED
:
COPY/DOWNLOAD
LV3, 4
:
CAMERA CONTROL
LV2, 3, 4
:
NETWORK STATUS
PICTURE QUALITY
:
ON
NETWORK CONTROL :
ON
4
6
7
8
9
5