Filter
Top Products
54 English
SAVING (COPYING) RECORDED VIDEO6
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
8 Specify the channel to copy
You can copy video from multiple channels at the same time.
Use the [CAMERA SELECT] button on the front panel to
specify the channel(s) you want to copy.
The specified channel(s) turns white from grey.
z The channel(s) that was playing back when the [MARK/
COPY] button was pressed turns green, and it is fixed as
the copy channel(s).
z Pressing the [MULTI] button selects all channels. Pressing
the button once again will deselect all channels except the
fixed one(s).
9 Turn the shuttle dial clockwise.
Copying to the archive area begins.
The message “COPY TO ARCHIVE AREA !” is displayed on-
screen during the copy procedure.
When copying is completed, “COPY FINISHED !” is
displayed.
To cancel copying
Press the [MARK/COPY] button.
Copies video saved in recording area or archive area onto a
USB memory.
Example: Copying 20 images
1 Insert a USB memory.
z The digital video recorder has one USB port each on the
front and rear panels; however, you cannot use them at the
same time. Insert a USB memory in either the front or rear
port. If memories are inserted into both ports, the front port
takes precedence.
z Requirements for USB memory:
USB2.0 High speed compliant device
Total space of 2GB or less
Prior to use, format a USB memory using the digital video
recorder.
2 Play video to be copied on a full screen.
3 Press the [STILL] button when the frame
to be copied is displayed.
COPY TO : ARCHIVE AREA
UNIT : TIME
AUDIO : OFF
HOW MANY : 00:00:10
COPY CH 01
01
02 03 04 05 06
05 06
07 08
09 10 11 12 13 14 15
15
16
SELECT COPY CHANNEL
COPY START ->
FORMAT/ERASE: USB MEMORY
FORMAT/ERASE START ->
[CAMERA SELECT] button
[MULTI] button
COPY TO ARCHIVE AREA ! < 56% >
COPY FINISHED ! < 100% >
Copying to a USB memory
COPY CANCELED ! < 0% >
[MARK/COPY] button
[PLAY/STOP] button
Shuttle dial
Jog dial
[STILL] button
STILL