Filter
Top Products
214 English
DVR VIEWER21
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
The image display pattern can be selected from 4 patterns: full
screen, quad screen, 9 screen, 16 screen using the toolbar
button.
z The display pattern can also be selected from the menu
bar or from the context menu displayed on the screen.
z On the 4/9/16 screen, double clicking on a specific image
will display it on full screen.
Right clicking the Viewer screen will display the context menu.
Clicking the channel you want to display within the context
menu will switch the channel display.
When using the quad screen, the number of the channels
being viewed is displayed in [Channel] of the operating panel.
Example: Displaying channel number 10 in the top
right screen
(Context Menu)
z The channel being currently displayed is checked on the
specified channel.
z Unchecking a channel results in the images of that channel
not being displayed but at least one image display is
necessary for each screen pattern, therefore all the images
on the screen cannot be turned off.
z The channel number of the image data that is not being
saved is not displayed in the context menu.
z Multiple channels cannot be selected.
z The images of each channel are played back
correspondingly.
Even when switching the displayed channel, if there is no
image data at the current point of playback, no images will
be displayed.
Switching the Display Pattern of the
Screen
01 09/29/2005 16:28:24
02 09/29/2005 16:28:23
03 09/29/2005 16:28:23
04 09/29/2005 16:28:23
01 09/29/2005 16:28:23
04 09/29/2005 16:28:24
02 09/29/2005 16:28:24
03 09/29/2005 16:28:24
01 09/29/2005 16:28:23
04 09/29/2005 16:28:24
02 09/29/2005 16:28:24 03 09/29/2005 16:28:24
01 09/29/2005 16:28:24
Toolbar
Full screen
Quad screen
9 screen
16 screen
Selecting the Channel Displayed on
the Screen
01 09/29/2005 16:28:24
Channel display of the displayed image