Filter
Top Products
146 English
ADVANCED MENU SET8
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
6 Turn the jog dial to select the
“QUALITY” setting and then turn the
shuttle dial clockwise.
The cursor moves to “STATIC AREA 2”.
[Settings] ( indicates default setting)
7 Use the same procedure to set the
“QUALITY” settings in “STATIC AREA
2” and “STATIC AREA 3”.
8 Turn the shuttle dial clockwise.
The cursor moves to “EFFECTIVE REC MODE”.
9 Turn the shuttle dial clockwise.
“NORMAL REC” flashes.
10 Turn the jog dial to select the
“EFFECTIVE REC MODE” setting and
then turn the shuttle dial clockwise.
The cursor moves to “AREA SET”.
[Settings] ( indicates default setting)
Setting Description
MIN Lowest quality
LOW Low quality
OFF
Normal
(Same picture quality as outside ROI area)
HIGH Fine
MAX Best quality
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : MIN
STATIC AREA 2 : OFF
STATIC AREA 3 : OFF
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : MIN
STATIC AREA 2 : LOW
STATIC AREA 3 : HIGH
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : MIN
STATIC AREA 2 : LOW
STATIC AREA 3 : HIGH
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
Setting Description
NORMAL REC ROI is enabled during normal recording.
ALARM REC ROI is enabled during alarm recording.
NORMAL/
ALARM
ROI is enabled during normal and alarm
recording.
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : MIN
STATIC AREA 2 : LOW
STATIC AREA 3 : HIGH
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : MIN
STATIC AREA 2 : LOW
STATIC AREA 3 : HIGH
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->