Sanyo DSR-5709P DVR User Manual


 
English 219
3 Specifications
Note that product appearance and specifications are subject to change without prior notice.
Specifications
Product name Digital video recorder with multiplexer function
Product number DSR-5716P (16 channels), DSR-5709P (9 channels)
Hard disk capacity Can be expanded using 80, 160, 250, 300 or 500 GB hard disk (sold separately)
Television system Conforms to PAL format
Image compression JPEG2000
Audio compression method PCM
Recording resolution 720 x 288 (fields)
Recording type Field recording
Picture quality 5 levels (Basic, Normal, Enhanced, Fine, Super Fine)
Recording rate 28 levels (100 to 0.033 FPS)
Recording areas Recording area, Archive area
Magnification x2 digital zoom using the [ZOOM] button
Search modes
Alarm log search, Alarm search, Alarm thumbnail search, Time/date search
Archive area search, Motion detection search, Bookmark search
Date/clock settings Day, Month, Year (last two digits), Hours, Minutes, Seconds
Date and time positions 2 position; upper and lower (display may also be turned off)
Camera title display
Each channel; up to 10 alphanumeric characters and symbols (display may also be turned off)
Memory backup Approximately 30 days (for 48 hours of electrification)
Video input terminal VBS/VS 1.0 V (p-p), 75 , BNC (DSR-5716P: x16, DSR-5709P: x9)
Video output terminal Through output of each video input, BNC (DSR-5716P: x16, DSR-5709P: x9)
Main monitor output terminal VBS 1.0 V (p-p), 75 , BNC (x1)
Monitor 2 output terminal VBS 1.0 V (p-p), 75 , BNC (x1)
VGA output Dsub-15 pin
Audio input terminal 8 dBs, 47 k, unbalanced RCA (x2)
Audio output terminal 8 dBs, 1 k, unbalanced RCA (x1)
Terminals
LAN terminal
10BASE-T/100BASE-TX, RJ-45 (x1)
Compatible protocol: UDP, TCP/IP, HTTP server, NTP, SMTP, DHCP
RS-485/422 terminal RJ-11 (x2) (with a termination switch)
USB terminal Internal USB 2.0 x 2 (front terminal prioritized)
Remote control input terminal Two-wire voltage control (x2)
Alarm input terminals
No-volt contacts (with a pulse width of 100 ms or more) (DSR-5716P: x16, DSR-5709P: x9)
Alarm output terminal Relay (DC24V MAX. 1A /AC125V MAX. 0.3A)
Sensor alarm output terminals Open collector, Low level active (Max. 25 mA) (DSR-5716P: x16, DSR-5709P: x9)
Alarm reset input terminal No-volt contacts (with a pulse width of 100 ms or more) (x1)
Non rec out terminal Normal 5V DC, Low level active (x1)
Clock adjust input terminal No-volt contacts (with a pulse width of 100 ms or more) (x1)
Clock adjust output terminal Open collector, Low level active (Max. 25 mA)
Warning output terminal Normal 5V DC, Low level active (x1)
Normal recording area disk full
warning output terminal
Normal 5V DC, Low level active (x1)
OUTPU1, OUTPUT2 Normal 5V DC, Low level active (x1)
External timer input terminal No-volt contacts (with a pulse width of 100 ms or more) (x1)
Expandable slot Option SCSI board (Ultra 160 SCSI), Option S-ATA board
Power supply voltage 120 to 240 V AC, 50/60 Hz
Current consumption 720 mA
Allowable operating temperature 5 – 40ºC
Allowable operating humidity 10 – 80%
Dimensions 420 (W) x 86 (H) x 364.5 (D) mm (Not including protruding areas or rubber pads)
Weight 5.5 kg without HDD, 6.1 kg with HDD, 6.7 kg with 2 HDDs
Accessories Power cord (x1), Power cord tie (x1)