Filter
Top Products
156 English
ADVANCED MENU SET8
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
9 Turn the jog dial to select “TIME TO
SYNCHRONIZE” and then turn the
shuttle dial clockwise.
“01” flashes.
10 Set “TIME TO SYNCHRONIZE”.
Set the time to synchronize. The time is synchronized with the
clock on the NTP server and updated each day at the
specified time.
Hours: Select from 01 to 23.
Minutes: Select 00, 10, 20, 30, 40, or 50.
Example: 10:30
(1) Turn the jog dial to select “10” and then turn the shuttle
dial clockwise.
“00” (minutes) flashes.
(2) Turn the jog dial to select “30” and then turn the shuttle
dial clockwise.
Default setting: 01:00 (Time is updated at 1 AM.)
11 Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
<TIME ZONE SET>
TIME ZONE
GMT Dublin, Lisbon, London
<NTP SET>
SYNC. WITH NTP SERVER : ON
NTP SERVER ADDRESS : 192.168.001.020
TIME TO SYNCHRONIZE : 01:00
<TIME ZONE SET>
TIME ZONE
GMT Dublin, Lisbon, London
<NTP SET>
SYNC. WITH NTP SERVER : ON
NTP SERVER ADDRESS : 192.168.001.020
TIME TO SYNCHRONIZE : 10:30
EXIT/OSD