Filter
Top Products
152 English
ADVANCED MENU SET8
INTRODUCTION SETTINGS NETWORK
CONTROL
NETWORK
OPERATION
NETWORK
SETTINGS
OTHEROPERATION
11 Turn the jog dial to select “2. ALARM
REC TRIGGER SET” and then turn the
shuttle dial clockwise.
The <ALAMR TRIGGER SET> screen is displayed.
On the <ALARM REC TRIGGER SET> screen, you can
specify the interlocked operation of the camera when an alarm
is detected. You can configure the camera to automatically
change lens orientation, auto-pan or tour on alarm detection.
12 Turn the jog dial to select a camera
number, and then turn the shuttle dial
clockwise.
“OFF” for “ACTION” flashes.
For DSR-5709P, the camera numbers from “01” to “09” are
displayed.
z If a protocol is not set in the <PROTOCOL/ADDRESS
SET> screen, “------” is displayed for “ACTION” and no
value can be set.
13 Turn the jog dial to select the
interlocked operation, and then turn the
shuttle dial clockwise.
The cursor moves to the next “ACTION” field.
[Settings] ( indicates default setting)
z For “PRESET”, you can set “PRESET2-9” with DSR-5709P
and “PRESET2-16” with DSR-5716P.
z In the case more than one camera has issued an alarm
simultaneously, some or all trigger actions may fail to
operate correctly because only one camera can be
operated at a time.
z Actually available actions depend on each camera. For
more information, refer to the camera's instruction manual.
14 Use the same procedure as above to set
the interlocked operation of other
cameras.
15 Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
Setting Description
OFF No action triggered.
PRESET
Moves the camera lens to the angle
corresponding to your selected preset
number.
PAN Starts automatic panning.
TOUR Starts tour.
SEQUENCE Starts sequence.
<ALARM REC TRIGGER SET>
CH ACTION CH ACTION
01 OFF 09 ---------
02 OFF 10 ---------
03 OFF 11 ---------
04 OFF 12 ---------
05 --------- 13 ---------
06 --------- 14 ---------
07 --------- 15 ---------
08 --------- 16 ---------
EXIT/OSD