Filter
Top Products
ADVANCED MENU SET8
English 145
Set the Region of Interest (ROI) to enable recording at
different picture qualities, only of areas preset on the monitor.
Enables recording at high picture qualities for areas where
motion is detected.
This function allows you to raise the quality level for the preset
ROI or lower the quality level for unnecessary areas without
changing the image size each time.
There are three static areas in the ROI. The static areas are
fixed and preset.
Perform the following settings.
z QUALITY: Set for each of the three static areas in the ROI.
z EFFECTIVE MODE: Set to perform normal recording or
alarm recording.
z AREA SET: Set the location and size of each static area.
z Refer to “Setting ROI area” (JP.147) for static area
settings.
z If ROI settings overlap, the settings from the previous row
are prioritized.
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select
“8.ADVANCED MENU SET” and then
turn the shuttle dial clockwise.
The <ADVANCED MENU SET> screen is displayed.
3 Turn the jog dial to select “1.ROI SET”
and then turn the shuttle dial clockwise.
The <ROI SET> screen is displayed.
4 Turn the shuttle dial clockwise.
The camera number flashes.
5 Turn the jog dial to select the camera
number for the camera to set ROI for
and turn the shuttle dial clockwise
twice.
The cursor moves to “QUALITY” for “STATIC AREA 1”, and
“OFF” flashes.
Setting ROI
Setting the ROI
MENU
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : OFF
STATIC AREA 2 : OFF
STATIC AREA 3 : OFF
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : OFF
STATIC AREA 2 : OFF
STATIC AREA 3 : OFF
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->
<ROI SET>
CH-01 QUALITY
STATIC AREA 1 : OFF
STATIC AREA 2 : OFF
STATIC AREA 3 : OFF
EFFECTIVE REC MODE : NORMAL REC
AREA SET ---->