Filter
Top Products
D-160 Owner's Manual (Edit function)
101
3-5. Erasing specific data (Program erase)
Here, erase all data recorded in any program that is no longer necessary.
Unlike the "erasing the program" explained in "Recording/Playback", the program number
will remain intact and other settings will all be in the initial state same as when the New
Program was made (at completion of erase, ABS 0=ABS END).
Therefore, the tempo map setting and program title will be in the initial figures.
<Note>
Note that the UNDO/REDO function cannot be used at Program Erasing.
4
2
1
3
1. Press the STORE key while holding down the HOLD/> key.
The D-160 will enter the Program Setup mode, and display the message “Select PGM!”, and then
the current Program number and title. (The Program number and “SURE?” will flash.)
Example:
“Select PGM!”
->
“P02 [*****”
(02 flash, 02 is the current program number)
2. Turn the JOG dial to select the number of a Program you wish to erase.
The selected Program number will flash. (Can not use "New Program?.")
3. Press the ERASE key.
The message
“Erase PGM**?”
(where, ** is the selected Program number) appears on
the display, and “SURE?” will flash.
4. Press the EXECUTE/YES key.
When the erase operation is completed, the display changes to the
“Title Edit PGM**?”
menu in Setup mode, where you can name the Program from which you erased the data.
* To name the Program, follow the explanation on page "147" regarding the “2-4. Title Edit
PGM?” menu in Setup mode.
If you do not wish to name the Program, press the STOP button or the EXIT/NO key.
The display will change to the ABS indication, with the Program number unchanged.
The title of the Program is erased, and the Program will use a temporary title.
SHIFT
AUTO
CLIPBOARD PLAY
LOCATE ABS 0
DIGITAL MULTITRACK RECORDER
D-160
IN / OUT
PUNCH
PGM CHANGE
8/167/156/145/134/123/112/101/9
RECORD TRACK
HD ACCESSLOCKED MTC IN
ENDIN OUTSTART
AUTO PUNCH
AUTO PLAY IN OUT
AUTO RTN
CLIPBOARD
PASTEMOVECOPY
AUTO RTN
ERASE UNDO REDO
DISP SEL
EXECUTE
/YES
EXIT
/NO
HOLD/ STORE RECALL
TIME BASE SEL
TAKE
REHEARSAL
LOCATEPUNCH
F FWDREWINDPLAYSTOPRECORD
VARI PITCH
LOCATE ABS END