Filter
Top Products
D-160 Owner's Manual (MIDI sync function)
120
POWER
SHIFT
AUTO
CLIPBOARD PLAY
LOCATE ABS 0
DIGITAL MULTITRACK RECORDER
D-160
IN / OUT
PUNCH
PGM CHANGE
8/167/156/145/134/123/112/101/9
RECORD TRACK
HD ACCESSLOCKED MTC IN
ENDIN OUTSTART
AUTO PUNCH
AUTO PLAY IN OUT
AUTO RTN
CLIPBOARD
PASTEMOVECOPY
AUTO RTN
ERASE UNDO REDO
DISP SEL
EXECUTE
/YES
EXIT
/NO
HOLD/ STORE RECALL
TIME BASE SEL
TAKE
REHEARSAL
LOCATEPUNCH
F FWDREWINDPLAYSTOPRECORD
VARI PITCH
LOCATE ABS END
TAPE IN 1 - 16
External Mixer
INPUT 1 - 8
BUSS OUT (GROUP OUT) 1 - 8
INPUT L/R
STEREO OUT L/R
Master
Recorder
INPUT
Computer System
with MMC/MTC
soft ware
MTC
MIDI
2. MTC sync/MIDI machine control system
The following will explain synchronization by the MTC (MIDI time code) output
and the computer controlling system using MMC (MIDI machine control). In this
system, the D-160 will be the master and the computer (with sequence software)
will be the slave.
The D-160 will attach any desired offset (time difference) against ABS time (absolute
time) and output it as MTC in any desired frame rate.
It can also carry out the proper operation upon receiving an MMC and Fostex
System Exclusive Message from outside. In this case, because the D-160 can setup
a DEVICE ID number by the SETUP mode "2-18. MIDI Device ID Setting" menu, a
multiple number of D-160's can be separately controlled by changing the DEVICE
ID numbers in the transmitted message from the computer.
In regards to the corresponding content for MMC, refer to the "MMC list" on page
"173" and on the Fostex System Exclusive Message, the "Fostex Exclusive List" on
page "174."
* Set D-160 in the initial state.
* Confirm the program and sampling frequency.
MIDI OUT
MIDI OUT
MIDI IN
MIDI sound sources
MIDI IN
D-160
MIDI IN
MMC or Fostex System Exclusive Message
MIDI OUT
OUTPUT 1 - 16