Filter
Top Products
D-160 Owner's Manual (Punch In/Out)
82
2-1. Punch In/Out Rehearsal (Using a foot switch)
Rehearsal
1. Press the foot switch once while holding down the STOP button.
The D-160 will enter the "Rehearsal" mode, and the 35 dot display on the upper
row of the screen will show "Rehearsal On" for one second. Only the REHEARSAL
LED (green) will blink.
2. Press the RECORD TRACK select key “3” to set Track 3 to ready mode. (Indicator
“3” will flash.)
3. Press the PLAY button at a location just before the punch in point to play back
data.
4. Rehearse the guitar part while playing back the drum and bass sounds.
5. Press the foot switch once at the Punch In point, and press the foot switch
again at the Punch Out point. The following diagram illustrates this operation.
You will hear the guitar sound you are playing only between the punch in and
out points.
REHEARSAL LED
TAKE LED
RECORD button LED
PLAY button LED
PLAY LED will light up
RECORD LED will blink
PLAY LED will light up
PLAY LED will light up
3
Blink
3
Light up
3
Blink
Only Track 3 enters INPUT monitoring
status. (However, the D-160 will not
record any data in Rehearsal mode.)
Rehearsal mode (manual Punch In/Out)
All tracks are under REPRO
monitoring status.
All tracks are under REPRO
monitoring status.
REHEARSAL LED will blink
REHEARSAL LED will blink
REHEARSAL LED will blink
End of rehearsal
1. Press the foot switch again while holding down the STOP button to cancel
Rehearsal mode.
The 35 dot display on the upper row of the screen will show "Rehearsal Off"
for one second. Also, the REHEARSAL LED (green) will turn off, indicating that
you have quit the Rehearsal mode.
PUNCH OUT point
PUNCH IN point
Press the foot
switch once.
Press the foot
switch again.
RECORD TRACK display
PLAY
PLAY
PLAY
RECORD