Filter
Top Products
D-160 Owner's Manual (Saving and loading data)
103
* The following items can be saved and loaded as song data:
Memory data (CLIPBOARD IN/OUT, AUTO RTN START/END, AUTO PUNCH IN/OUT)
Time Base (ABS, MTC, or BAR/BEAT/CLK)
Setup mode:
* Time signature setting (BAR BEAT), * Tempo setting, * Click On/Off setting
* Preroll Time setting, * Midi Sync Out setting, * MTC Frame Rate setting
* MTC Offset setting, * MTC Offset Mode setting, * Rec Protect On/Off setting
* Slave Mode on/off setting, * Slave Type setting, * FS (sampling frequency) setting
* The following items cannot be saved or loaded as song data:
Auto Play mode and Auto Return mode On/Off
Vari-pitch mode On/Off, and pitch data
Setup mode:
* Digital In setting, * Digital Out setting, * Bar/Beat Resolution On/Off setting
* Device ID setting
<Notes>
* You can save or load only one Program to and from a DAT or adat at a time.
Use a SCSI device to save or load all Programs.
* The D-160 can only save and load data to and from digital devices that support non-
compression recording, and S/P DIF or adat format digital recording functions.
Basically, any device that supports the adat format can be used for the D-160’s saving and
loading operation.
However, for the S/P DIF format, you cannot use an MD or DCC that employs compression
recording system, a CD-R machine that automatically corrects the interval between Programs,
or other devices that automatically change the sampling rate. Devices with SCMS can be
used if they satisfy the conditions described above.
Basically, any digital device that supports non-compression recording, and the S/P DIF or
adat formats, should be able to save and load the D-160’s data correctly. However, some
devices may not, due to the occurrence of multiple errors. The following Fostex models
have been tested and approved for the save and load operation:
FOSTEX: D-15, D-10, D-5